Download NetApp Certified Data Administrator, ONTAP.NS0-160.VCEplus.2019-06-10.91q.vcex

Vendor: Network Appliance
Exam Code: NS0-160
Exam Name: NetApp Certified Data Administrator, ONTAP
Date: Jun 10, 2019
File Size: 1 MB
Download Exam

How to open VCEX files?

Files with VCEX extension can be opened by ProfExam Simulator.

Download
ProfExam Simulator

Purchase
Coupon: TAURUSSIM_20OFF

Discount: 20%

ProfExam Simulator ProfExam Simulator ProfExam Simulator ProfExam Simulator ProfExam Simulator

Demo Questions

Question 1
A storage administrator has an existing FAS2554 HA pair. They want to add a new FAS2620 HA pair to the cluster. The SAN protocols are licensed. Referring to the exhibit, after adding the second HA pair, how many more nodes are available to add for future use?
  1. 4
  2. 12
  3. 8
  4. 2
Correct answer: B
Question 2
When a write from a SAN host is received, the information is stored within the controller before it is written to the underlying RAID. In this scenario, which component stores the data?
  1. HBA
  2. FlashCache
  3. Flash Pool
  4. NVRAM
Correct answer: D
Question 3
An administrator notices that the applications are running slowly. The administrator wants to determine which component on the ONTAP subsystem is experiencing the most latency. In this scenario, which command would you use to accomplish this task?
  1. run -node * stats show system::sys_avg_latency
  2. statistics system show
  3. run -node * -command sysstat -x 1
  4. qos statistics latency show
Correct answer: D
Explanation:
Reference: https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-cmpr-940%2Fqos__statistics__volume__latency__show.html
Reference: https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-cmpr-940%2Fqos__statistics__volume__latency__show.html
Question 4
A customer has four or more nodes in a cluster. More than four target ports are being used by the SVMs in any node. The customer wants to limit the number of paths that can be used to access LUNs on the nodes, so that the paths do not exceed the recommended maximum of eight.
In this scenario, which three actions will accomplish this task? (Choose three.)
  1. Use ALUA protocol.
  2. Use multipathing software.
  3. Use port sets for iSCSI.
  4. Use Selective LUN Mapping
  5. Use FC switch zoning.
Correct answer: CDE
Explanation:
Reference: https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-sanconf%2FGUID-133F725D-6EE4-4ACF-8352-73E731B7CFD9.html
Reference: https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-sanconf%2FGUID-133F725D-6EE4-4ACF-8352-73E731B7CFD9.html
Question 5
A customer configured CIFS in an ONTAP 9.5 SVM. The customer wants to verify if the "CIFS Server" is accessible from each node of the cluster. In this scenario, which command will accomplish this task?
  1. vserver cifs session
  2. vserver cifs connection show
  3. vserver cifs check 
  4. vserver cifs domain discovered-servers
Correct answer: C
Explanation:
Reference: https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-cmpr-950%2Fvserver__cifs__check.html
Reference: https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-cmpr-950%2Fvserver__cifs__check.html
Question 6
An export policy rule for a volume is set by using the command shown in the exhibit.
If clients with IP addresses 10.64.19.0 and 10.64.18.20 accessed the export, what is the outcome?
  1. Neither client is given access.
  2. Client 10.64.19.0 is given access but 10.64.18.20 is not given access.
  3. Client 10.64.19.0 is not given access but 10.64.18.20 is given access.
  4. Both clients are given access.
Correct answer: D
Question 7
Referring to the exhibit, to where will LIF4 move if you unplug the cable from node02 port e0d?
  1. node01 port e0c
  2. node02 port e0c
  3. node02 port e0d
  4. node01 port e0d
Correct answer: D
Question 8
To which three objects on an ONTAP 9.3 cluster would you assign a QoS throughput floor? (Choose three.)
  1. a volume on FAS 
  2. a LUN on AFF
  3. a volume on AFF
  4. an SVM on AFF
  5. a file on AFF 
Correct answer: BCE
Explanation:
Reference: https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.pow-perf-mon%2FGUID-77DF9BAF-4ED7-43F6-AECE-95DFB0680D2F.html
Reference: https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.pow-perf-mon%2FGUID-77DF9BAF-4ED7-43F6-AECE-95DFB0680D2F.html
Question 9
You execute the cluster1::> network ipspace show command, and notice that two IPspaces are not able to be renamed or deleted.
Referring to the exhibit, what are these two IPspaces? (Choose two.)
  1. IPspace1
  2. Default
  3. IPspace2
  4. Cluster
Correct answer: BD
Question 10
A storage administrator has a single-node FAS cluster. The administrator wants to add a second node to convert the FAS storage array into a switchless cluster.
In this scenario, what would the administrator do to accomplish the task?
  1. Add a new AFF HA pair and replace the existing FAS.
  2. Add a cluster interconnect switch and a second FAS of the same model.
  3. Add a new single node AFF controller to the existing FAS storage array.
  4. Add a new single node FAS controller of the same model.
Correct answer: B
CONNECT US
HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset

HOW TO OPEN VCEX FILES

Use ProfExam Simulator to open VCEX files
ProfExam Screen

ProfExam
ProfExam at a 20% markdown

You have the opportunity to purchase ProfExam at a 20% reduced price

Get Now!